Auger Bit Adjustable T-Handle 16 inch

This is a good clean, antique, adjustable bit stock auger bit T-handle. It is 16 inch long overall, and has enough range capacity to handle most any of the medium to larger auger bits with the tapered square bit stock end. In the late 1800's these T-handles were usually designed for auger bits over 1" to 2.5" diameter as these would give the user plenty of leverage for that drilling application.  The auger bit can be held in place via an adjustable double V being closed by the two wing nuts as in the photos. simply turn the wing nuts clockwise to tighten the bit in place.  You should be able to use the old auger bits with the nut at the end of the taper also, provided you use a washer with that thread nut. The hardwood handles are nicely turned, very well made with one brass ferrule and one missing ferrule on the other handle.  Both are well attached, and firmly mounted, no cracks, clean, no rust. All in very good working order. A good vintage tool, not marked but but quality made, long lasting.