Williams Wrench Double Head Opened End Set of 5
This is a rare set of 5 different sized double head, opened ended wrenches, all marked "WILLIAMS FORGED IN U.S.A." on each. Each has the Williams wrench number on them also, they are 28, 33A, 35, 36, 3?. The biggest one is the one with the light stamp, and we can't see the 2nd number, but most likely is 38. The largest is marked 1-1/2 & 1-5/16, the 36 is 1 & 1-1/4, the 35 is 31/32" & 1-1/16, the 33A is 7/8" & 15/16", the 28 is 19/32" & 25/32". Though the set is not complete, these are very hard to find Engineer's wrenches, and were generally ordered in sizes needed for a machine application only. All are in good to very good shape, none are dirty or rusty, the biggest one is the only one with lots of little dings on it, but the opening are better than 95% like new. It appears the smaller they are the better they are in condition. We note a few with very light pitting is a few area, mostly on the head outer flat surfaces. None are bent, or damaged, all are useable. The biggest one is 14" long, down to the smallest at 6.8" long overall. Williams is a top quality forging operation, well known for top of the line engineers and machanics tools, made in the U.S.A.!