Stanley 233H Ratchet Screwdriver w/Drill Bits
Click thumbnails for expanded view.
- Item Not Available
This is a super nice, clean, used 1960's era ratchet spiral screwdriver / push drill! It is marked "GREAT NECK MODEL NO. 97A MADE IN ENGLAND", but is identical to the STANLEY YANKEE NO. 233H, and the same Yankee bits fit in the chuck. (Most likely made by Stanley England for Great Neck resale.) This screwdriver is the small size that Stanley made in regards to tooling (bits), or the tips that fit into the chuck, they are the 7/32" or .218" shank diameter size. The chuck holds any of the 6 bits included (2) different slot bits, (one Phillips) and (3) different size drill bits also. There is very little wear on the screwdriver, some minor scratches on the inside of the clear plastic handle, about 97% like new!. All the bits are in very good to new condition, and all fit into the handle storage area. In very good mechanical condition also, only some minor wear on the inside of the clear plastic handle to report, from the tools moving around in there is suppose, as there is little sign of use. This one has a rapid return spring, on the spiral system, so it springs back after you push it in to drive a screw or drill. Basically the same features of the older Stanley ratchet screwdrivers, except this model doesn't allow for the spiral system lock down, (with the whole spiral shaft inside) for using the ratchet system only, independent of the spiral system. This model was designed and works fine this way, and the handle storage feature is nice too! Measures 8.4" long overall.
- Reference #
- Stanley (Great Neck)
- Country of Origin
- Width: 0 inch
- Height: 0 inch
- Depth: 0 inch
- Weight: 0 pound
- Very Good
Items Similar To "Stanley 233H Ratchet Screwdriver w/Drill Bits"
Pr. Stanley Liberty Blue Smooth Planes
Stanley Hand Drill Egg-Beater No. 624
Old Stanley wood handle brace drill, tool
STANLEY adjustable level, Walnut wood, old, vintage, Stanley SW, No. 30
Stanley Handyman Ratchet Screwdriver Drill Point Set
Stanley Handyman No. 133H & 233H Spiral Ratchet Screwdrivers
Stanley No. 34 Tool Catalog
Early, Stanley #18 Block Plane