French cast iron balance scale early 1900's
Lufkin No. 199 Test Indicator w/ Box Rare!
This is a very nice clean vintage precision test indicator marked "LUFKIN NO. 199" on the box and on the indicator as well. The indicator is in good u...
Stanley Yankee Phillips Screwdriver Adapter No. 31A , 131A
Have a North Brothers, or Stanley Yankee Spiral Ratchet Screwdriver? Need a Philips head bit for it? This adapter is for standard 1/4" Hex drive bits, giv...
19th century Miniature pharmaceutical Brass Mortar
19th century Miniature Brass Mortar. High; 2 ½ inches.
Bay State Taps Boxed Tap Set 1/4-20
Offering this quality set of good clean sharp useable taps in their original wood box with wood dividers and sliding top. The box top is clearly marked "BA...
Farm Implement Combination Wrench
This is a nice clean farm implement combination wrench with 3 nut openings. On the end with the cut out sizes are 11/16" closed, 3/4" opened end. The ...
Iron Pincers 14" End Nipper
This is a nice clean pincer, very sturdy with a good tight joint. There is no maker's name on this one. No rust, little wear, a slight bend on one of the handle...
Stanley No. 1 Try & Mitre Square Type 2
This is a nice clean very old combination try & Mitre square. It is the 8" model and it's marked Stanley on the handle. Refered to as the Winterbottom'...
Snell 1.25" Boring Machine Auger Bit
This is a hard to find boring machine auger bit (1.255 dia. x 12" long) (end shaft diameter is .495") marked "SNELL MFG. COMPANY". It's also...
Walden Spitite Vintage 5/8" Nut Driver
This is a nice wood handle nut driver, marked by the maker "Spintite Walden 5/8". (MAKER: WALDEN WORCESTER WORCESTER MASS. U.S.A.).
This is a used d...
C. S. Osborne Leather Working Chisel Tool 1/4"
This is a nice clean vintage special curved end form carving gouge chisel, marked "C.S. OSBORNE & CO. NEWARK N.J. 1/8" on the steel. It measure 1/...
W. Butcher Tanged Firmer Chisel 1.75" wide
This is a nice old heavy duty tanged firmer chisel in good sharp ready to use condition. It's marked "W. BUTCHER CAST STEEL" with a very clear stamp o...
Sargent 2" Socket Firmer Chisel
This is a rarely seen socket firmer chisel marked "SARGENT V-B-M" on the steel. It's in good used condition, sharp and ready to use. It's not rusty, t...
Channellock Pliers Two Types Slip Joint - Long Nose
This is a nice clean set of two types of pliers both marked Channellock. The long nose pliers are marked 3017 1/2, they are 8" long and have the ornate des...
Mongin 4" Wide Scraper or Cutter
This is a very nice 19th century heavy duty scraper or cutter for a special purpose I'm sure. marked with a maker's name "MON MOGIN AINE PARIS ED MOGIN SR....
Merrill & Co. 1/2" Heavy Mortise Chisel Jennings & Griffin
This is a nice clean, 19th century heavy duty mortise chisel. It's 1/2" wide x 11" long steel & overall is 15.5" long. It's in very nice cond...
Wood plane with a steel blade made of wood wood working tool
One large wood plane 23" long by 3" wide by 2.75" thick, from top of handle to bottom of plane it is 5.75" tall, It is all wood excep...
Lufkin No. 8 Catalog
This is a good older hard to find No. 8 Lufkin Tools Catalog. Issued by THE LUFKIN RULE CO. SAGINAW MICHIGAN U.S.A., printed in U.S.A., no date mentioned, know...
American Caliper Co. Center Gage
This is a nice old center gage by a rarely seen maker! American Caliper Company dates back to the late 1800's. This one is marked American Caliper Co. Rockford ...
Ohio Tool Nosing Rounding Plane
This is a nice clean nosing plane set up for cutting a 1.25" diameter or a .62" radius x 13.5" long overall. It's a rather hard to find plane mar...
Stanley No. 203 Block Plane
Stanley No. 203 Block Plane. Plane is smaller then the normal Block Plane. It measures 5 1/2" in length and has a 1 3/8" wide cutter. It was manufactu...
About Us -